Outdoor Kitchen Cost Calculator
Estimate an outdoor kitchen construction budget.
Last updated: November 5, 2026
Starting figures illustrate this model. Enter your own measurements, quoted costs and applicable terms; this page does not retrieve live prices or provider rates.
Estimated project cost
—
- Low-range estimate: —
- High-range estimate: —
- Typical variable cost: —
- Total excluding base fixed charges: —
On this page
Quick summary: Estimate an outdoor kitchen construction budget.
Read the method, example and limitations
Updated reference sections in this guide are in English.
Guide language: English. Updated October 15, 2026.
What this calculator estimates
Estimate an outdoor kitchen construction budget.
Inputs and units
Enter Kitchen linear feet, Low cost per linear foot ($), Typical cost per linear foot ($), High cost per linear foot ($), Utility runs and permits ($), Contingency (%). Use the units shown. Required fields cannot be blank. Use zero only where that field and the model allow it. Select Calculate after changing the values.
Method and assumptions
For Outdoor Kitchen Cost Calculator, use 'Kitchen linear feet' as quantity q and 'Utility runs and permits ($)' as the fixed charge F. For each low, typical or high unit cost U, total = (q x U + F) x (1 + contingency/100). Low must not exceed typical, and typical must not exceed high. The final breakdown labelled total excluding fixed charges includes any contingency attached to those charges.
Worked example
These are hypothetical example inputs, not a statement of local market prices.
| Kitchen linear feet | 12 |
|---|---|
| Low cost per linear foot ($) | 1200 |
| Typical cost per linear foot ($) | 2500 |
| High cost per linear foot ($) | 5000 |
| Utility runs and permits ($) | 3000 |
| Contingency (%) | 12 |
| Low scenario | $19,488.00 |
|---|---|
| Typical scenario | $36,960.00 |
| High scenario | $70,560.00 |
| Typical variable cost | $30,000.00 |
| Total excluding base fixed charges | $33,960.00 |
Limitations
Prefilled prices for outdoor kitchen cost are illustrative budgeting assumptions. Replace them with local written quotes and avoid including 'Utility runs and permits ($)' both in a unit quote and again as a fixed charge. A linear unit-cost model does not capture every scope, access, size, materials or regulatory requirement.
Match the quantity to the quoted scope
Use the area basis named in the form and ask which appliances, cabinetry and worktops the quoted rate covers. Gas, water and electrical extensions can be separate fixed work.
For each low, typical or high unit rate, the calculation is (quantity × rate + fixed work) × (1 + contingency/100). The typical result uses the entered typical rate; it is not the midpoint unless you enter a midpoint rate. These three rates are your scenarios, not a market-price database. All three receive the same fixed work and percentage allowance.