Paver Patio Cost Calculator
Estimate a paver patio installation budget.
Last updated: November 5, 2026
Starting figures illustrate this model. Enter your own measurements, quoted costs and applicable terms; this page does not retrieve live prices or provider rates.
Estimated project cost
—
- Low-range estimate: —
- High-range estimate: —
- Typical variable cost: —
- Total excluding base fixed charges: —
On this page
Quick summary: Estimate a paver patio installation budget.
Read the method, example and limitations
Updated reference sections in this guide are in English.
Guide language: English. Updated October 15, 2026.
What this calculator estimates
Estimate a paver patio installation budget.
Inputs and units
Enter Patio square feet, Low installed cost per sq ft ($), Typical installed cost per sq ft ($), High installed cost per sq ft ($), Excavation and drainage ($), Contingency (%). Use the units shown. Required fields cannot be blank. Use zero only where that field and the model allow it. Select Calculate after changing the values.
Method and assumptions
For Paver Patio Cost Calculator, use 'Patio square feet' as quantity q and 'Excavation and drainage ($)' as the fixed charge F. For each low, typical or high unit cost U, total = (q x U + F) x (1 + contingency/100). Low must not exceed typical, and typical must not exceed high. The final breakdown labelled total excluding fixed charges includes any contingency attached to those charges.
Worked example
These are hypothetical example inputs, not a statement of local market prices.
| Patio square feet | 400 |
|---|---|
| Low installed cost per sq ft ($) | 12 |
| Typical installed cost per sq ft ($) | 22 |
| High installed cost per sq ft ($) | 40 |
| Excavation and drainage ($) | 1000 |
| Contingency (%) | 10 |
| Low scenario | $6,380.00 |
|---|---|
| Typical scenario | $10,780.00 |
| High scenario | $18,700.00 |
| Typical variable cost | $8,800.00 |
| Total excluding base fixed charges | $9,780.00 |
Limitations
Prefilled prices for paver patio cost are illustrative budgeting assumptions. Replace them with local written quotes and avoid including 'Excavation and drainage ($)' both in a unit quote and again as a fixed charge. A linear unit-cost model does not capture every scope, access, size, materials or regulatory requirement.
Match the quantity to the quoted scope
Use the finished patio area. Excavation, base depth, drainage, edging and disposal can dominate differences between bids, even when the visible paver material is similar.
For each low, typical or high unit rate, the calculation is (quantity × rate + fixed work) × (1 + contingency/100). The typical result uses the entered typical rate; it is not the midpoint unless you enter a midpoint rate. These three rates are your scenarios, not a market-price database. All three receive the same fixed work and percentage allowance.